If you’ve been around for a little while, you might know that I have a mini ironing board from Ikea that I use for my sewing. After I made my first ever dress, I had some left over fabric in a cute fox print which I began turning into an ironing board cover (I actually just cut the shape out and that was the end of that project). Well, that single piece of fabric covered my ironing board for years and years and I never actually turned it into a proper iron board cover. Over the years, it turned really grotty, had heaps of glue stains and was looking rather embarassing ( i even stopped featuring it on my blog because I knew someone would comment haha). So I had finally had enough and it was time to sew up brand new ironing board cover because I cannot look at my old one anymore. So here we are, let’s make a brand new ironing board cover!

Tired of your own worn-out ironing board cover? It’s time to give your ironing board a fresh look and feel with a custom-made cover. This DIY project is easier than you think, and with the addition of elastic and Heat protective wadding, you can create a professional-looking cover that will last. There is no pattern for this cover so let’s just get started.

For my own iron board cover, I have chosen to use a pair of curtains I thrifted a little while ago. My goal with these curtains is to turn it into a few items around the sewing room and then use the rest for a garment of some type. These are the same curtains used in this tutorial for sewing a tailors ham.

Note: Unfortunately, all the photos I took of the crafting process were corrupted, and I can’t find the original files. For now, I have tried to explain the steps as best I could, but if I do find the photos, I will add them. I’m so sorry to all the visual learners (such as myself).

Materials You’ll Need:

• Ironing board
• Fabric (cotton, linen, or a blend)
• Elastic (1/4 inch wide)
• Ironing board pad (or use your old one)
• Bias Binding (colour of choice)
• Thread
• Sewing machine (or needle and thread)
• Scissors
• Pins
• Measuring tape

Instructions:

1. Measure Your Ironing Board:
   • Measure the length and width of your ironing board, including the rounded edges.
   • Add a few extra inches to each measurement to allow for seams and a snug fit.
2. Cut Your Fabric:
   • Place your ironing board ontop of your fabric and use it as a guide to cut around leaving 3 inches of seam allowance around the whole edge.
3. Finish the Edges:
   • Sew bias binding along the edge of your fabric piece. This will ensure a clean finish.
   • Note: You can also use your bias binding as a chanel for your elastic if you wish.
   • Once sewn, fold over the edge and sew a hem that is thick enough for your elastic to pass through. Don’t forget to leave a small gap for you to thread your elastic into.
4. Prepare the Padding (Optional):
   • If you want to add extra padding to your cover, cut a piece of ironing board pad to the same size as your fabric pieces.
5. Elasticate the Edges:
   • When you have created your bias channel or your hem channel, take a safety pin, stab it through an end of your elastic and then feed it into the channel you just made. Go all the way around and then tie up your elastic and seal up your channel gap.
6. Finishing Touches:
   • Press the seams flat.
   • Place your heat protective wadding on your ironing board
   • Slip the cover over your ironing board and wadding, ensuring the elastic stretches to fit snugly.
   • Enjoy your new, custom-made ironing board cover!

Tips:

• Choose a sturdy fabric that can with stand the heat of your iron. I used an old curtain I thrifted a few years back.
• For a more professional look, use a serger to finish the edges of your fabric.
• If you don’t have a sewing machine, you can hand-sew the cover, but it may take longer.
• Consider adding a decorative touch, such as a ribbon to personalize your cover.

With a little time and effort, you can create a beautiful and functional ironing board cover that will elevate your ironing experience. Happy sewing!

Please Note: This is not a sponsored post. All opinions and thoughts expressed are solely my own and not influenced in any way. This page contains affiliate links/codes which aids in funding future blog posts. Please don’t feel obliged to use any of my links if you don’t want to.